MultiPort/LT User Reference
Page 56
Chapter 2
To transfer programs:
LT> ftp
Connection to 132.160.22.10 established
220 muri FTP server (Version 4.7 Sun Sep 14 12:44:57 PDT 1986) ready
> [your favourite FTP commands]
> quit
221 Goodbye.
2.2.5.4. Initialize Command
This command re-initializes MultiPort/LT:
LT> initialize
LT>
2.2.5.5. Load Command
The Load command connects the MultiPort/LT to a boot server and then loads
the gateway code (or any other application code). The Load command, unlike
the Boot command, will not automatically execute the loaded code.
LT> load ?
Remote Cmd>
After the code has been loaded, it can be run or saved to Flash Eprom
(recommended).
2.2.5.6. Flash Commands
The Flash EPROM used to store the Gateway Code can be accessed via the
Flash commands, which are shown below:
LT> Flash
Flash Memory Functions
Flash> ?
Available commands:
Save
Erase
Display
TestVPP
SELFlash
Quit