MultiPort/LT User Reference
Page 40
Chapter 2
Device addressing: OK
LANCE: OK
ISCC: OK
MultiPort/LT Monitor 1.01 -- Financial Services [0]
1024 kilobytes of parity memory installed
Last reset: External
MultiPort/LT Command Processor 1.01
LT>
The exact message displayed will vary depending on how the MultiPort/LT is
currently configured. For example, self tests can be bypassed using the
command CONfigure Option TRUSTworthy.
2.2.5
Monitor Main Menu
The main menu displays all available commands:
LT> ?
MultiPort/LT monitor commands (min abbrev in capitals) :-
Boot [ Tcp | Atalk | Flash | Console ]
CONfigure [ lots-of-stuff ]
FTp [ hostname | address ]
Help (this message)
INItialize
Load [ Tcp | Atalk | Serial | Console ]
FLash [ Save | Erase ]
Run [ address ]
SERVEr (of incoming telnet)
SHow [ Date | Version | EEprom ]
TAlk [ end-ch ]
Test [ hardware ]
user debugging escape
Version [ Daughterboard | EEprom | Ethernet | Internet ]
2.2.5.1. Boot Command
The Boot command connects the MultiPort/LT to a boot server, loads the
gateway code (or any other application code) and then executes it.
