24
MOTION SETUP > PARKING ACTION SETUP
OSD -
2
3
PARKING ACTION SETUP
If ‘PARK ENABLE’ is set to ‘ON’, camera runs assigned function
automatically if there is no PTZ command during assigned
‘WAIT TIME’.
PARK ENABLE
WAIT TIME
The time is displayed with "hh:mm:ss" format and you can change this
by 1 sec. unit.
1. To place the cursor on the time marked as below, press the near key.
2. Move the joystick Left/Right to adjust hours, minutes and seconds.
3. Move the joystick Up/Down to select the digit.
4. By pressing the near key, save current setting.
PARKING ACTION
Ex) If ‘HOME’ is selected for park action, camera will move to home
position when there is no PTZ command during the assigned
‘WAIT TIME.’
OO:1O:OO
ON / OFF
00:00:05 ~ 04:00:00
HOME / PRESET 1~255(95 excepted) /
SCAN 1~8 / PATTERN 1~4 / GROUP 1~8
1
2
<
MOTION SETUP
>
====================================================
POWER UP ACTION
JOG MAX SPEED
JOG DIRECTION
<
ALARM INPUT SETUP
>
<
PARKING ACTION SETUP
>
BACK
EXIT
ON
9O/SEC
NORMAL
‘<PARKING ACTION SETUP>’ select
and press the ‘NEAR’ Key
<
PARKING ACTION SETUP
>
====================================================
PARK ENABLE OFF
WAIT TIME OO:1O:OO
PARK ACTION HOME
BACK
EXIT
