WeberTech Fineshot D35, Manual

Page: 10 / 13

.
9
3. Digital Camera Features and Applicantion
1) Digital Camera Features(Mode switch repeatedly cycles)
a. Normal- 26/99 appears in the LCD
b. Ar – Audio Record
Press the mode button until ‘Ar’ appears in the LCD. Pressing the Snap button within 5 second
will cause the camera to start recording for s long as the
snap
button is pressed down. If the
snap button is not pressed within 5 second the camera will revert to normal picture taking mode.
Whilst recording, the LCD display flashes ‘ Ar ’. If the recording stops because the memory is full,
the ‘memory full’ audio tone is sounded and the display will stop flashing and display ‘ 00’ .
c. AP – Audio Playback
Press the mode button until ‘ AP ’ appears in the LCD. Pressing the snap button within 5 second
will cause the camera to play back the most recent audio recording. If the snap button is not
pressed within 5 second the camera will revert to normal picture taking mode. Whilst playing, the
LCD display flashes ‘
AP’. once in Audio Playback mode, repeated press of the snap button will
step the camera through each of the audio recordings in the camera(most recent first). Keeping
the
snap button pressed down will also cycle through the audio recordings. Pressing mode
button during playback will stop the audio clip. (Minimum audio recording length is set to 0.5
second)
d. dA/dP/dC – Delete Last Object
Delete last object is selected using the
mode
button. If the last object captured was an audio
recording ‘ dA ’(delete audio) will be displayed, if the last object was an image, then ‘ dP '(delete
Picture) will be displayed, or if the last object was part of a confinuous capture sequence, the
‘
dC ’(delete continuous) will be displayed. If the camera is empty, the mode will be suppressed.
The mode works in the same way as ‘ CL ’(Clear All), ie. Once the mode is selected, pressing the
snap
button once will cause the camera to beep and ‘ dA ’, ‘ dP ' or ‘ dC ’, to start flashing. Pressing
the snap button again within 5 seconds will delete the last audio clip, picture or continuous
capture sequence.
e. Ct – Continuous mode
Pictures may be taken continuously for as long as the
snap
button is pressed(and the camera is
not full) as follows: Press the mode button until ‘ Ct ’ appears in the LCD. Pressing the snap
button within 5 second will cause the camera to start taking pictures for as the snap button down.
If the
snap
button is not pressed within 5 seconds the camera will revert to normal picture taking
mode. ( Note1. During continuous mode the camera will allow pictures to be taken regardless of
the available light, which could result in insufficient exposure. See Application “Avi Create” for
how to convert the pictures taken into a video clip.)