background image

1

2

COOKBOX INSTALLATION

1

HEAT SHIELD INSTALLATION

1

Make sure the slotted 
end of the burner tubes 

(1)

 properly aligns 

into the slots on the 
backside of the cookbox. 

1

 HEAT SHIELD & BAFFLE REMOVAL

11

Heat Shield and Baffle Removal:

A)

  Remove two (2) bolts from the inside of the cookbox frame (using a 5/16" 

wrench with a ratchet extender) to release the heat shield and baffle form 
the cookbox assembly. 

B)

  Slide out and remove the heat shield and baffle from the cookbox 

assembly.

Heat Shield and Baffle Installation:

A)

  Slide in the heat shield and baffle into the cookbox assembly.

B)

  Install two (2) bolts into the inside of the cookbox frame (using a 5/16" 

wrench with a ratchet extender). 

NOTE: The grills illustrated may have slight differences than the model purchased.

 MANIFOLD ASSEMBLY REMOVAL

10

 BURNER TUBES INSTALLATION

2

Manifold Assembly Removal:

A)

 Remove bolts 

(1)

 from both sides of the cookbox frame (using a 3/8" 

wrench or socket) to release the manifold from the cookbox assembly.

B)

  Slide the manifold out and slightly down 

(2) 

to remove the manifold from 

the cookbox assembly.

C)

  Slide ALL of the burner tubes out of the cookbox assembly.

Manifold Assembly Installation:

A)

  Slide ALL of the burner tubes into the cookbox assembly.

 

 

FOLLOW INSTALLATION STEPS FOR INSTALLING THE 
NEW COOKBOX ASSEMBLY, AND GRILL RE-ASSEMBLY.

TOOLS NEEDED:

TOOLS NEEDED:

- 5/16"

- 3/8"

TOOLS NEEDED:

- 5/16"

Summary of Contents for Summit Cookbox









Reviews: