Weber SRV 300, Operating And Maintenance Manual

Page: 16 / 24

16
1
1
1
Clean / change air filter cartridge
Remove the air filter cover (1).
Remove the air filter insert (1) from the air filter enclosure / air
filter cover.
Clean air filter insert as specified by the engine manufacturer
if there is damage or if it is extremely dirty.
Change the engine oil
Remove the oil dip stick (1).
Place the unit on the side with the oil filler neck and drain oil.
Danger of scalding due to hot oil.
Check the oil fill level with the oil dip stick again.
Maintenance work
Fill with oil in accordance with specifications.
Only drain engine oil when at operating temperature.
When working in the area of the engine compartment
there is a danger of being burnt
!
All maintenance work: Select a collection vessel that is
large enough to prevent oil from spilling onto the ground.
Dispose of waste oil in an environmentally friendly man -
ner (regulation on waste oils).
Dispose of oils, greases, cloths soaked in oil, and
replaced parts with oil on them in an environmentally
friendly manner.
UPPER LEVEL