Weber SRV 300, Operating And Maintenance Manual

Page: 19 / 24

19
Troubleshooting
Operating fluids and fill levels
Fault Possible cause Remedy
Tamper does not start
Operating error Execute the start process
as prescribed
Lack of fuel Check the fuel level
Air filter fouled Clean / change air filter
Fuel filter fouled Change the fuel filter
Spark plug fouled Clean, adjust, replace the
spark plugs
Engine runs, but does
not reach full speed or
engine runs, but will stop
after only a short time
The fuel line is incorrectly
mounted
Check the mounting of the
fuel line
Air filter fouled Clean / change air filter
Fuel filter fouled Change the fuel filter
Spark plug fouled Clean, adjust, replace the
spark plugs
Air in carburetor or line Press priming pump at least
3 times
Engine runs at full rpm,
tamper does not tamp
or tamps inadequately;
unclean compaction
pattern
Centrifugal clutch is defective
Tamping foot is worn
Repair
Change the tamping foot
Assembly Operating material
Summer Winter SRV
Quality 300
Engine
Engine oil SAE 10 W 40 0.1 L
Gasoline Unleaded gasoline in accordance
with DIN 51607
0.63 L
Tamper lower part
Shell Gadus S2 V 220AD 2 or
comparable KP2K-20 grease
As necessary
Lubricating points Shell Gadus S2 V 220AD 2 or
comparable KP2K-20 grease
Every 50 h