Weber Pellet Pro Stacker Ring Instruction Manual Download Page 4

Page: 4 / 4

Connect the RTD wire ends.

Place the spacer ring on the bottom portion of the WSM smoker
and on top of that, the top portion of the WSM smoker.



Install the metal RDT grommet into the existing hole as
shown. You will need to remove the bolt prior to installing
the grommet.

You are now ready to fire up your WSM Weber

with our Pellet Pro® Pellet Hopper!

Summary of Contents for Pellet Pro Stacker Ring

Page 1: ...Pellet Pro Stacker Ringfor Weber WSMGrillInstructionManual...

Page 2: ...6 Wrench 10mm Wrench 1 Attach the brackets to the outside of the ring with a Phillips screwdriver and a 7 16 wrench Be sure that the side of the bracket at about 120 is bolted to the ring with the squ...

Page 3: ...o pieces of tape in order to separate the backing of the heat resistant aluminum tape strips Then take the strips of aluminum tape and cover the gap between the spacer ring and hopper arm 5 With the P...

Page 4: ...the WSM smoker and on top of that the top portion of the WSM smoker Install the metal RDT grommet into the existing hole as shown You will need to remove the bolt prior to installing the grommet You...