Items Included:
WSM Spacer Ring
Pellet Pro® Pellet Hopper
Attachment Brackets
Fastenings
Pellet Hopper Support Leg
Extra Long RTD Probe
(4) Strips of Heat Resistant Aluminum Tape
Tools Required:
Phillips Screwdriver
7/16” Wrench
10mm Wrench
1.
Attach the brackets to the outside of the ring with a Phillips
screwdriver and a 7/16” wrench.
Be sure that the side of the bracket at about 120° is bolted to
the ring, with the square side outward.
2.
Once brackets are place, flip the stacker ring so that the opening
is closer to the bottom of the ring and slide the Pellet Pro® Pellet
Hopper through the opening from the outside.
2
Larger
Smaller
