103047_SHB_Rev2.1_080611
MPE 750 Turbo Marine
Open Loop
1
Service Manual
Page 20
4.6 Valve
play
-
Hex wrench SW5 [3/16 “]
-
Feeler gauge, measurement range 0.08 mm - 0.25 mm [0.0031 - 0.0098 in.]
-
Valve adjustment tool, see spare parts catalogue
-
Combination wrench 24mm [15/16 “]
- Bar
magnet
-
Measurement tool for adjustment plate, reading 0.01mm [0.0003 in.]
-
Adjustment plates from 2.5 - 3.7 mm [0.0984 - 0.1457 in.], see spare parts catalogue
-
Valve cover seals, see spare parts catalogue
-
2x O-rings, see spare parts catalogue
Removing the valve cover
Checking and setting the valve play
To get correct measurement valves, check and adjust valve play with a cold
engine.
1)
Remove the cable harness on the
cam shaft sensor (1).
2)
Remove the spark plugs.
See
Chapter
Removing the spark
plugs.
