4.7 Communication module and radio connection
The communication module is installed in the rear housing component. This transmits data
from the appliance to an external output device via WLAN or an LTE connection - depending
on the user's choice and the active operating mode. The basic hydraulic functions are always
guaranteed by component separation.
To use the SMART-FEATURES and for registration, follow the instructions in Chapter 4,9,
.
4.7.1 Standards and data sheets
Confirmed standards concerning electromagnetic compatibility:
EN IEC 61000-6-1:2019
EN IEC 61000-6-2:2019
EN IEC 61000-6-3:2006 + A1:2010
EN IEC 61000-6-4:2019
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
ETSI EN 301 489-19 V2.1.1
ETSI EN 301 489-52 V1.1.0
Confirmed standards concerning radio communication:
ETSI EN 301 511 V12.5.1 (2017-03)
ETSI EN 301 908-1 V13.1.1 (2019-1
ETSI EN 300 328 V2.2.2 (2019-07)
ETSI EN 301 893 V2.1.1 (2017-05)
ETSI EN 303 413 V1.1.1 (2017-06)
4.7.2 Information regarding radio channels used
WIFI range:
GNSS:
Frequency range:
2400Mhz-2483.5Mhz
5150MHz-5350MHz
5470MHz-5725MHz
Channel width: Broadband
Number of RF channels:
WIFI 2.4GHz: 13
WIFI 5GHz: 9
4G range:
B1 (2100), B2 (1900),
B3 (1800), B4 (AWS 1700),
B5 (850), B8 (900)
B12 (700), B13 (700),
B18 (800), B19 (800)
B20 (800), B26 (850),
B28 (700)
Frequencies:
3b
Ae1
Ae2
L1
2G range
B2 (1900)
B3 (1800)
B5 (850)
B8 (900)
