22
Actions to be taken before long-term storage (longer than 1 month)
If the machine is to be stored for longer than six months, then contact the Weber
service organization to discuss additional measures.
Entire joint cutter
– Clean thoroughly
– Check for leaks
– If there are leaks – correct defects
Fuel tank
– Empty fuel and fill with clean fuel
up to the lower edge of filler neck
Engine
– Check oil level, if necessary
fill to upper oil-level mark
– Check air filter, clean,
replace if necessary
– Check fuel filter, change
if necessary
All bare parts / accelerator /
accelerator control cable /
fastening bolts
– Oil / grease
Summary of Contents for SM 62-2 HD
Page 1: ...1 SM 62 2 HD 0401502 Operating and Maintenance Manual...
Page 2: ...2...
Page 23: ...23...
