Weber mt CR 3-II, Operating And Maintenance Manual

Page: 14 / 28

14 CR 3-II
1
2
3
Adjusting the guide bar
Adjust the desired work height of the guide bar with
the set screw (1).
Checking the engine oil level
Pull the oil dip stick out of the crankcase.
The correct oil level is between the min. and max. marks.
min max
Checking the fuel level
Open the cover (2), unscrew and remove the gas cap (3),
check the fill level, and if necessary, top up with clean
diesel fuel to the lower edge of the filler neck.
Stop operating the engine immediately when the oil level
reaches the min. mark and top up oil until it reaches the
max. mark. Risk of engine damage if the oil level drops
below the minimum oil level in unfavorable operating
conditions.
For work at the fuel system, have a suitable fire-
extinguishing agent ready.
Fire, naked light, and smoking is forbidden!