Weber mt 0140302, Operating And Maintenance Manual

Page: 16 / 32

16
Compacting
Move the vibration adjustment lever (1) as far as it will go to
position ( ).
Push the drive lever (2) into the desired direction of travel.
Forward
= Press the drive lever forward
Reverse
= Pull the drive lever back
Standstill
= Allow the drive lever to slide into 0 position
Change the direction of travel in good time.
At obstructions (walls, pits, etc.), ensure that no one can
be caught between the machine and the obstruction; or
ensure that the machine does not slip into the pit.
Shut off
Push back gas lever and let engine run idle for a few minutes.
Move vibration lever to position .
Close water shut-off valve (1) if necessary
Press down the parking brake (1) (horizontal) until it locks in
place.
Push the stop lever (1) of the engine to the left.
1
1
1
2
1