Weber mt 0116144, Operating And Maintenance Manual

Page: 21 / 28

21
WARNING
If lubricating oils and fuel come into contact with skin,
they can cause skin cancer.
Wear protective gloves.
If skin contact has occurred, wash the affected areas
thoroughly.
8.2. Description of the maintenance operations
Park the machine on a horizontal subsurface.
Switch off the engine and wait for several minutes until
the oil has collected in the crankcase.
Unscrew the oil dip stick from the crankcase.
Wipe off the oil dip stick with a clean cloth.
Insert the oil dip stick in the oil filler neck as shown,
but do not screw it in.
Pull out and read the oil dip stick; the correct oil level ranges
between the upper level (max) and the lower level (min).
Screw the oil dip stick back into the oil filler neck.
CAUTION
Danger of burn injuries at the hot engine and its attachments.
Allow the combustion engine to cool down sufficiently before
starting work.
Use extra caution during work on the engine when it is
at operating temperature.
Start the engine and allow the engine to warm up for
a few minutes.
Switch off the engine.
Unscrew the oil dip stick. It also serves as the seal for
the oil filler neck.
Place a suitable collection vessel under the oil drain.
8.2.1. Check the engine
oil level
8.2.2. Change the engine oil
max.
min.
UPPER LEVEL
LOWER LEVEL