23
1
2
8.2.4. Check the hydraulic
oil level
Lock the guide bar in place in the transport position.
Check the hydraulic oil level.
The oil level is correct when the oil is in the middle of
the view glass.
8.2.5. Change the oil in
the exciter
Start the engine and allow the engine to warm up for
a few minutes.
Switch off the engine.
Tilt the machine slightly.
Place a suitable collection vessel under the machine.
Loosen the oil drain plug.
Allow the oil to drain.
Tilt the machine in the other direction.
Fill fresh oil into the exciter in accordance with the specification.
Close the oil drain plug.
Shut down the machine.
Remove the V-belt guard (1).
Check the V-belt (2) for cracks and wear.
Replace the V-belt if it shows signs of extensive wear
or other damage.
Fit the V-belt guard.
8.2.6. Check V-belt
Summary of Contents for 0116144
Page 1: ...CR 3 II Hd 0116144 0116145 Operating and Maintenance Manual...
Page 26: ...26 Note...
Page 27: ...27 Note...
