Webb 1938316001, Original Instructions Manual, Page: 5 / 48

5
RISIDUAL RISKS
Even with the intended use of the appliance there is always a residual risk, which cannot be prevented.
According to the type and construction of the appliance the following potential hazards might apply:
- Contact with exposed saw teeth of the saw chain (cutting hazards).
- Access to the rotating saw chain (cutting hazards).
- Unforeseen, abrupt movement of the guide bar (cutting hazards).
- Flung out of parts from the saw chain (Cutting / injection hazards).
- Flung out of parts of the work piece.
- Inhalation of wood particles.
- Skin contact with chain oil.
- Loss of hearing, if required ear protection not used during work.
INSPECT YOUR LOG
Make sure there are no nails or foreign objects in logs to be cut.
WARNING
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a
result of this.
Please note that our equipment has NOT been designed for use in commercial, trade or industrial
applications. Our warranty will be 90 days from the original date of sale for commercial, trade or industrial
businesses or for equivalent purposes
.
SAFETY INSTRUCTIONS
Read and understand the owner’s manual and labels affixed to the machine. Learn its application and
limitations as well as the specific potential hazards. Retain these instructions for future reference. The
operator is responsible for following the warnings & instructions in this manual and on the product.
Read & understand operator’s
manual before using the
machine. Failure to follow
instructions could result in death
or serious injury. Please keep in a
safe place for future reference.
Whenever the machine is in use,
safety glasses/goggles must be worn
to safeguard against flying objects.
Hearing protection must also be used
to protect the operators hearing. If
the operator is working in an area
where there is a risk of falling objects,
a safety helmet must also be worn.
DANGER
Keep all bystanders & animals at
least 15 metres away from the
machine during operation. If
approached, stop the machine
immediately.
DANGER — THROWN DEBRIS
Remove objects that can be
thrown by the machine in any
direction.
Wear safety glasses.
Always wear gloves to protect your
hands. Wear foot protection or
sensible shoes when using the
machine
SHARP ROTATING CHAIN
Risk of Carbon Monoxide
Poisoning. Ensure working area is
correctly ventilated.
When repairing, servicing or
undertaking general maintenance and
cleaning, please remove the spark
plug cap from the spark plug.
Fire Risk
Fire and its vapors are extremely
flammable & explosive. Fire or
explosion can cause severe burns
or death.
Do not expose to rain or damp
conditions.
No smoking Do not use near a flame, or sparks
Hot Surface.
Running engines produce heat.
Engine parts, especially the
exhaust, become extremely hot.
Severe thermal burns can occur
on contact
Correct direction of cutting teeth
The chainsaw is supplied with a
KICKBACK chain, however
sometimes kick back can occur,
so always hold the unit firmly in
two hands. The Kickback danger
zone on your chainsaw is the
upper part of the nose of the
guide bar. Never saw with the
danger zone, which poses a
significant risk for kickback.
Do not use chainsaw one-handed.
Always use chainsaw two-handed
INSTRUCTION MANUAL