14
Ram ProMaster
Ibiza
4. Drill ¼ in. (7 mm) hole approximately 1.5 in.
(38 mm) from the top, and 0.5 in. (13 mm)
from the left edge of the left-side evaporative
emissions canister bracket.
NOTE: Components pictured may be slightly
different than found in some kits.
5. Install a short section of ¾ inch hose and a ¾
inch to 5/8 inch adapter on the output of the
coolant pump (15, 6, 14). Install the pump
and pump mount (34, 4) to the pump
mounting bracket using an M6 bolt and nut
(2, 5, 20).
6. Install the coolant pump assembly on to the
evaporative emissions bracket (5, 20).
