Webasto FCF 12, Quick Reference Operation Manual, Page: 7 / 8

Quick Reference Guide – FCF 5,000, 9,000, 12,000, 16,000
Page 7
MODE DESCRIPTIONS
COOL Mode Description
●
According to the difference between room temperature and set temperature, the microcomputer will decide
if cooling mode is on or off.
●
If room temperature is higher than set temperature, unit runs in cooling mode.
●
If room temperature is lower than set temperature, the compressor stops and only the fan will run.
●
Set temperature should be in range of 61°F to 86°F or 16°C to 30°C
HEAT Mode Description
●
If room temperature is lower than set temperature, the compressor runs in HEAT mode
●
If room temperature is higher than set temperature, the compressor will shut off and the fan will run.
●
Set temperature should be in range of 61°F to 86°F or 16°C to 30°C.
●
COOL ONLY UNITS HAVE NO HEAT MODE.
DEHUMIDIFY Mode Description
●
In DEHUMIDIFY mode, if the indoor temperature is higher than temperature setting, the unit will
operate in cooling mode and the fan will run on low speed
●
Set temperature should be in range of 61°F 86°F or 16°C to 30°C
FAN Mode Operation Procedure
●
Temperature can not be set in this operation mode.
TECHNICAL ASSISTANCE
If you require help, check our technical assistance website at
http://www.techwebasto.com
or call the technical
support hotline at (800) 860-7866.
For quick service, please have the following information available:
●
Full Name
●
Phone number including the area code
●
Unit Model Information
●
The type of assistance you are requesting
Registration
The heater can be registered by visiting www.techwebasto.com or by scanning the code.
A proof of purchase is required for all heaters that are not registered.