Quick Reference Guide –
FCF 5,000, 9,000, 12,000, 16,000
Page 5
Power ON/OFF
•
Press ON/OFF button to turn the unit on. Press it again to turn the unit off.
FAN Control
•
Press the FAN button, the fan speed will change in the following order:
→ HIGH →MID → LOW → AUTO →
•
In “DEHUMIDIFY” mode, the fan will work at low speed automatically
Temperature Setting
Press the
▲ or ▼
temperature setting keys to increase or decrease in 1
o
increments
•
The setting range of temperature in each mode:
COOL
61°F 86°F or 16°C 30°C
DEHUMIDIFY
61°F 86°F or 16°C 30°C
HEAT
61°F 86°F or 16°C 30°C
FAN
In this mode, temperature cannot be changed.
AUTO
In this mode, temperature cannot be changed.
MODE Setting
•
Press this key to change the operation mode in order of
→ COOL → DEHUMIDIFY → FAN → HEAT → AUTO →
•
In “COOL” mode, the LED marked
will be illuminated if the set temperature is lower
than room temperature. If set temperature is higher than room temperature, only the
fan will run.
•
In “Dehumidify” mode, the LED marked
will be illuminated and fan will work at low
speed within a certain temperature range. Dehumidifying is more efficient than in
cooling mode and it will save energy.
•
In “FAN” mode, the room temperature will be displayed and the temperature cannot be
set.
•
In “HEAT” mode, the LED marked
will be illuminated when the set temperature is
higher than the room temperature. When the setting temperature is lower than the
room temperature, the will not run.
•
In “AUTO” mode, the LED marked Auto will be illuminated and the room temperature
will be displayed. The temperature cannot be set as the system will run automatically
in the appropriate mode according to the contrast between room temperature and set
temperature.
•
COOL ONLY UNITS HAVE NO HEAT MODE.
Display Fahrenheit or
Centigrade
Pressing the
▲ and ▼ key simultaneously, will switch between Fahrenheit Centigrade
modes.
Error Codes
•
Refer to the provided installation manual.
Key lock
•
Press ▲and FAN key simultaneously, all keys are locked. Press ▲and FAN key
simultaneously again, to unlock the keys.
•
When keys are locked, the controller is locked out of system operation. “EE” will be
displayed.