Status
LED Backlight Color and State
Heating mode
GREEN
ON
Ventilation mode
BLUE
ON
Switched off heater - control element is activated
WHITE
ON
Error - no heating mode
RED
FLASHING
Preprogrammed heating mode - control element in stand-by mode
GREEN
FLASHING
Preprogrammed ventilation mode - control element in stand-by
mode
BLUE
FLASHING
NOTE:
If a user does not make any inputs with the control unit within 60 seconds and the heater is switched off, the
control uni will go into stand-by mode (display and LED are switched off).
Switching the heater ON using the quick-start button
The Quick Start button enables heating or ventilation with the push of one button
. The operating mode can be
adjusted to your personal preferences. Refer to the MultiControl operation manual on www.techwebasto.com.
Heating:
Quick start button is programmed for heating
Heater starts. The display screen shows the symbol
for “Heating” as well as the run-time remaining.
The quick start button shows a green light.
Ventilation:
Quick start button is programmed for ventilation
*Not available in
North America
Ventilation fan turns on. The fan speed and oper-
ating time are shown on the display. The quick
start button shows a blue light.
Error Messages
Error messages regarding the heater will be displayed with the “F” or “H” designation displayed before the numerical
error code. Explanations of these error codes can be found in the appropriate heater service manual. Error messages
regarding the control element are displayed by means of “T” symbol. These error codes can be found in the operation
manual for the MultiControl.
Error Codes
If error messages appear on the display, please contact Webasto technical support at 800-860-7866.
