5
I
NSTALLATION
A
IR
T
OP
5000
5-2
5.3
Mounting the Air Top 5000 Heater
A mounting template has been included with the heater kit. The template details all required hole locations and
clearances for ducting. Also, check for clearance around subfloor cross-members, structures and heat sensitive
components before proceeding with installation.
Preferably, the heater should be mounted as close as possible to the room or compartment to be heated. The heater
must be protected from the environment and, if necessary, mounted in an enclosure.
The heater is to be installed on a flat surface, utilizing either mounting arrangement as shown in figure 5-2 “Basic Kit” or
figure 5-3 “Optional Mounting Plate”. Access to the heater must not be obstructed. The space requirements in figure
4-1 for heater maintenance must be adhered to.
For mounting hole locations of all other kits where the mounting plate is not utilized, see figure 5-2.
Fig. 5-1:
Permissible Installation Position
Fig. 5-2:
Mounting Base Pattern - Basic Kit (Not to scale)
0 - 90°
0 - 90°
0 - 90°
The specified horizontal and axial angles of inclination must not be exceeded (see figure 5-1).