W'eau EV60, User Manual, Page: 5 / 102

ENGLISH
4
GETTING STARTED
Charging The Battery
IMPORTANT NOTE: Fully charge the pool vacuum (about 6 hrs) before using it
for the first time.
WARNING!
- Use only the original external adaptor and charging plug provided.
- Make sure the pool vacuum and the charging port are clean and dry before
set-up and charging. (TIPS: use a cotton bud to dry the charging port and
charging pins)
- Charging must be done indoors, in a well-ventilated area away from sunlight,
children, heat, ignition sources, and with an ambient temperature between
5˚C (41˚F) and 30˚C (86˚F).
- Never use the external adaptor and charging plug if any damage is detected.
- The charging pins are waterproof. However, remnants of water in the port and
around the pins could result in natural occurrence of stains (a byproduct of
chemical reaction between water and electric currents). Otherwise, the stains
can be removed by light scrubbing with a cotton bud soaked with juice of
lemon or vinegar.
- Make sure that the pool vacuum is turned off prior to charging.
1. Place the unit on a flat surface. Set the pool
vacuum to Power Off / Charging Mode by
turning the switching knob anticlockwise
until it clicks and completely exposes the
charging port.
2. Align and insert the charging plug to the charging port.
WARNING! Be sure not to invert the charging plug and ensure both the
charging plug and charging port are clean and dry before charging them.
TIPS: Use cotton bud to dry the charging port and pins. Plug the charging
cable of the external adaptor into the charging plug.