W'eau EV60, User Manual, Page: 12 / 102

ENGLISH
11
Cleaning the filter
WARNING!
Using the pool vacuum without a filter cone in place will VOID your
warranty.
In order to maximize the cleaning efficiency, be sure to clean the cartridge filter/filter cone before and after each
use.
CAUTION! If the pool vacuum is charging, disconnect the external adaptor from the power source and detach
the pool vacuum from the charging plug. Make sure the pool vacuum is OFF.
• Cleaning the filter cone
1) Place the pool vacuum on a stable surface.
2) Hold the pool vacuum and pry up the canister lever to the end to completely release the side locks.
Detach the canister and turn the filter cone
clockwise until its side tab out of the notch.
Remove filter cone from the cleaner.
CAUTION! Replace the damaged filter cone
immediately before the next
operation.
3) Clean out the debris and rinse the filter cone with water. If brushing is deemed necessary, use only a soft brush
to clean the filter cone gently and carefully.
4) Reverse the previous steps to re-assemble
the filter cone. Turn the filter cone
anticlockwise until its side tab is secured
inside the notch on both sides as shown.
You will hear a “click” sound.
5) Align and re-assemble the hood to the
pool vacuum and make sure the lever is
completely pushed down to the hood.
You will hear a “click” sound.