Weathermatic SoloRain 8014 Series, Owner'S Manual

Page: 9 / 12

5
http://support.weathermatic.com
during normal operation or when the set dial is moved out of the
RAIN DELAY position. If the sensor is activated while a program is
running, the program will be stopped within 16 minutes.
An installed sensor may be tested by moving the SET dial into
and then out of the RAIN DELAY position and observing the RAIN
DELAY symbol on the LCD.
4.3 Changing or Clearing a MIST CYCLE
Repeat steps above for setting a mist cycle to change duration and
delay times. See “Clearing one or all watering programs" to clear
the MIST CYCLE completely and start over.
5.0 Maintenance
5.1 Battery Replacement
The long life 3.6 volt size AA Lithium battery is replaceable if
necessary. Remove the four screws under the control housing and
gently open the unit. Replace the battery. Carefully replace the
housing and install the four screws. The battery is available as a
service part (77482) from Weathermatic.
WARNING: Damage to battery may cause fire, explosion
or electrical shock. Replace battery with Weathermatic
supplied service part only. Dispose of used battery
properly.
5.2 Plunger Cleaning
To clean the plunger and plunger tube gently remove the plastic
plunger retainer with needle-nosed pliers. Clean debris from the
plunger and plunger tube. Then replace the plunger retainer.
5.0 Maintenance