Weathermatic SoloRain 8014 Series, Owner'S Manual

Page: 7 / 12

3
http://support.weathermatic.com
3.2.2 Set Stop Time
Turn the Set dial to STOP TIME. Press the + / - keys to select the
desired STOP TIME for PROGRAM 1.
3.2.3 Set Schedule
The controller has three scheduling options:
3.2.3.1 Set Water Days
WATER DAYS , or daily, lets you choose which days of the
week you want to water (i.e., Monday, Wednesday, Friday
only).
Turn the SET dial to the DAYS position. Press the keys to select
the days you desire to water for PROGRAM 1. "+" will select
that day for watering. "-" will delete that day for watering
and that day will not be displayed in the DAYS programming
screen
3.2.3.2 Set Odd/Even Days
ODD/EVEN tells the controller to water on either the odd or
even days of the month (i.e., the controller will water on the
31st and the 1st when an ODD schedule is chosen).
Turn the SET dial to ODD/EVEN position. Use the keys to
select O or E.
3.2.3.2 Set Interval Days
INTERVAL waters every X number of days (from 1 to 30 days)
(i.e., water every 3 days, waters every 10 days, etc.). A value of
1 in an interval schedule means to water every day. When using
the interval option, you have the flexibility to tell the controller
what day to start the interval program on (up to 30 days out).
Turn the SET dial to ODD/EVEN position. Use the keys to
select O or E.
Turn the SET dial to INTERVAL. Use the keys to select an
interval from 01-30. PROGRAM 1 will now water per the
interval you have selected starting today. Example: An interval
of 1 waters every day, interval of 2 waters once every other
day.
3.3 Setting Additional Programs
If more than one program per day is desired, turn the SELECT dial
to Programs 2, 3, 4, 5, and 6 and repeat the START TIME, STOP
TIME, and SCHEDULE steps above. If no additional cycles are
needed proceed to next step.
3.4 Reviewing and Changing Your Watering Program
3.4.1 Reviewing Your Program
Turn the SELECT dial to the cycle you want to review.
3.4.2 Changing Your Program
Select the START TIME, STOP TIME, DAYS, INTERVAL, or ODD/
EVEN positions on the SET DIAL. You can make changes in the
program by changing any of the values.
3.0 Programming the Controller