
Turn dial to Advanced Menu. Push NEXT button to access review functions. Use UP/DOWN buttons to select
review functions you wish to view.
5.27.1
TEMP/DATA
TEMP/DATA provides the daily high/low temperature readings in Fahrenheit
(Celsius for 230V applications. Celsius is set using METRIC under UNITS menu) from
the SLW Weather Sensor for the past 5 days. Press NEXT to view daily high and low
readings for the prior day. Continue pressing NEXT to view up to 7 days of
temperature history.
5.27.2 SLW
> 5.27.2.1
LASTCOM
This feature records time elapsed since last successful communication between the
weather station and control panel.
> 5.27.2.2
BATTERY
Check the battery status in your wireless weather station here.
5.27.3 NEXT
RUN
NEXT RUN is the total amount of run time SMART has calculated for each zone
based on ET de cits and SMART system audit information entered on the SMART
side of the dial. NEXT RUN is calculated and revised each night at midnight 365
days per year. The cumulative run time will carry forward until the next scheduled
watering cycle. NEXT RUN times will return to zero after each watering cycle. To
review NEXT RUN, turn the dial to Advanced Menu. Use the UP arrow button to
access Review and then use the NEXT and BACK buttons to scroll through the
zones.
5.27.4
RUN/SOAK
This feature allows the user to review expected Run/Soak schedules that will occur
when the controller is in the SMART mode. Turn the dial to Advanced Menu. Use
the UP button to go to REVIEW and press the NEXT button. Use the UP button to
advance to RUN/SOAK. Press the NEXT button and zone 01 will show in the display.
Press NEXT again and RUN with a time will show. This is the maximum RUN time
the controller can do in SMART before going to SOAK. Press NEXT again and SOAK
will show in the display with a time. This is the minimum time the zone must soak
before it is ready to run again. SMART Run/Soak times can be changed by adjusting
the soil and slope settings at SOIL TYPE on the programming dial. The times are
also a ected by adjusting the SPRINKLER TYPE setting on the dial for precipitation
rate.
5.27.5
DEFICIT
De cit is the amount of water (displayed in inches) that needs to be replaced for
your plant material due to water loss through evapotranspiration – evaporation
from soil and transpiration from plants. Your SmartLine® controller will calculate
the water de cit each day at midnight based on data communicated to it by the
SLW series Weather Sensor. The water de cit will continue to accumulate until the
next scheduled watering cycle and will return to a zero reading when watering is
nished. The SmartLine® controller uses an internationally recognized formula
called the Hargreaves formula for calculating evapotranspiration.
During a rain event, de cits will decrease to zero. SmartLine® will not begin