Page 15 of 36
Weatherdock AG Sigmundstraße 180 D-90431 Nürnberg
Tel.:+49 911 37 66 38 30 www.weatherdock.de
3.1.2.
Automatic activation via water contact
for version A049 / A040-BW-COM
If the device is permanently under water for more
than one second the „water contact switch“ is
triggered automatically. The electrical resistance is
measured between the antenna axis and the back
panel screw, which is further away from the antenna
axis. Owing to the configuration it is ensured that the
device is not activated by splash water.
Trigger switch via water contact
To deactivate the easyRESCUE push the slider to the
top, so that the release protection breaks and you
have access to both buttons (
ON
and
TEST)
. Now press
both buttons for more than 3 seconds and the LEDs
stop flashing. Otherwise the device operates as long
the battery capacity allows to.
contact 1,
device ground
contact 2,
antenna axis
