Quick Instruction
Anschließen leicht gemacht
10 of 26
Weatherdock AG Sigmundstraße 180 D-90431 Nürnberg
Tel.:+49 911 376638-30 www.easyAIS-IS.de
1.5.3
Connection to the PC/Notebook and
settings
1.5.3.1
Serial connection to the PC and settings
There are two ways to connect your PC/Notebook to the easyAIS-IS:
You either make use of the serial RS232-port of your PC/Notebook
(normally this is a SUB D-9 male built-in socket), or you can use a free
USB slot.
Serial connection via RS232 socket:
Connect the white cable ending (NMEA out +) to pin 2 and the green
cable ending (NMEA out -) to pin 5 of a SUB D-9 female plug and
connect it to RS232-interface of your PC/Notebook.
1.5.3.1
USB connection to the PC and settings
You only have to install the USB-cable (enclosed in the package)
between the easyAIS-IS and the USB port of your computer.
Follow the instructions to install the driver.
If necessary you have to connect with the internet to download the
driver.
1.5.3.1
Test of the connection to the PC and
settings
Now open the following program on your PC/Notebook:
Programs/Accessories/Communication/HyperTerminal
Select the correct input port.
