®2019 WernerCo Part No. 24-0340 REV. C 11/2019
6
2018 & newer – Pull out the four grey plastic clips at
the back of the headliner (Figure 12). While holding
the center black foam piece up, pull down on the back
of the headliner until the white plastic pin (shown in
Figure 13 with foam piece already removed) clears
the bottom of the foam piece and remove the foam
piece. Cut the foam piece along the corner edge at
the back (Figure 14). Place the front portion of the
foam back into the van between the headliner and the
roof rib and replace the four plastic clips (Figure 15).
Figure 12
Figure 13
Figure 14
Figure 15
Cut along
corner edge
Discard
back portion
Keep front
portion