Step 4: Assemble Bottom Cross Rails
Install the Bottom Cross Rails(#6) between each
two legs withCross Rail Clamps (Part#13 & #14)
a.
by the fittings (Part #22, #23 & 24). Part #13 is for
Center Legs, and #14 is for Corner Legs. (see
Diagram G)
b. Slide the cover rails so that they are both 10''up
from the ground. Do not tighten the bolts now.
6
e. Repeat to assemble the other side( as shown in Diagram F).
Step 5: Square and Anchor the Frames
Check the mearsure of frame both 10' at the front
a.
and back corners, as welI as the center.
b.
Take a diagonal measure as shown in Diagram H.
When these two measures are equal the frame is
square. Adjust the frame until they are equal to
within 1''.
c.
Once equal check the width measures again to
ensure all are equal at 10'.
d.
Next, install Anchors (Part # 15, #16
17) at the
& #
4 Corner bent legs by screwing the removable
anchor (#15) into the ground and to the inside of
the shelter. Secure with Cable (#16) and Cable
Clamp(#17) (as shown in Diagram I).
15
16
17
10
14
13
6
6
6
6
14
13
13
13
14
6
6
6
6
14
10'
14
13
6
6
6
6
10'
13
13
13
14
6
6
6
6
10
2
1
18
1
18
1
18
10
2
Diagram F
Diagram G
Diagram H
Diagram I
23
24
22
23
24
22
14
13
