5
ASSEMBLY
Step 1: Assembling roof frame
●
Lay out the roof frame parts as shown below (fig. 1).
1
NOTE:
●
The five connectors are different and individually
numbered. When using them, ensure the welded
socket for the cross rail is below the bend (fig. 2).
2
9
Welded socket
10
11
12
13
●
Assemble the center section of the roof using the shoulder cross rails (4,5),
3-way peak connectors (12) and 4-way peak connector (13). Insert the
rafter poles (6) into the connectors afterwards .Connect rafter poles(6) with
3
12
13
12
6
6
4
4
6
6
6
6
●
Attach the shoulder cross rails (4,5) to the 3-way side connectors (9, 10) and
4-way side connectors (11). Insert the connectors (9, 10,11) into the rafter
poles (6) to complete the assembly of the roof (fig. 4).
4
10
4
5
9
11
9
5
5
10
11
NOTE:
●
Be sure that all tubes are fully inserted. Use a rubber
mallet if necessary.
●
When using the connectors, be sure to remove the
protective caps first.
Step 2: Attaching legs
●
Assemble the legs (fig. 5).
Leg type
Qty
Connect to
Corner legs
4
Upright pole (1),
Corner extension tube (2),
Bent corner leg (3)
Center Legs
2
Upright pole (1),
Center extension tube (4)
5
1
1
4
2
3
●
Insert one assembled center leg into the 4-way side connector (11) (fig. 6).
6
11
4
1
●
Insert the corner legs into the corresponding side connectors (9, 10) (fig. 7).
7
10
2
1
9
2
1
3
3
4
5
6
9
10
12
11
5
5
5
4
4
4
5
4
5
4
12
10
9
6
6
6
11
13
6
6
5
5
17
4
4
5
4
6
18
10
4
5
9
11
9
5
5
10
11
4
4
5
4
10
2
1
9
2
1
3
3
11
4
1
1
1
4
2
3
3-way peak connectors(12) and 4-way peakconnector (13) with fittings(17,
18). (fig. 3).
