16
5. Turn on the power of Block Heater and check all functions as to Operation section
described below. If the Block Heater has any functional defects, please contact your
local representative or Wealtec worldwide service center for assistance.
D. Operation
1. Turn on the On/Off power switch, the Power light and LED monitor will light up. The
temperature LED monitor will display default value of 30
℃
.
2. Press Temperature Up and Down-key to set the desired value. If the function is not
workable, simultaneously press Up and Down-key to alternate display of Fahrenheit
Temperature to Centigrade display.
3. Press Timer Up and Down-key to set running time. For continuously running without
timer control, set the value to
“0”. Timer setting function will
then only be activated
under
“Stop” situations.
4. After all settings are completed, press Start/Stop button to initiate the Block Heater. By
pressing start button, Heating indicator will light up and Set Temp light will be switched
off. The Temperature LED monitor will flash and display the status of temperature. The
