3
Installation
The product must be installed and maintained by a
suitably quali
Ƃ
ed professional in compliance with latest
building/construction and/or electrical regulations and
relevant legislation.
The supply cable must be installed inside the pole and
not be exposed to the outside environment.
Warning:
Switch off mains electrical supply prior to
installing and connecting the luminaire.
Notice:
If the luminaire is modi
Ƃ
ed by anybody other
than the original manufacturer, then the warranty will
no longer be valid and shall become the full respon-
sibility of the modifying person/organisation. Claims
based on defects attributable to improper installation
and/or application, and the consequences thereof, are
excluded.
Installation Procedure
1) Switch off mains electrical supply.
2) Check that rating shown on luminaire label conforms
with mains electrical supply.
3) Feed mains cable
A
into outreach bracket
D
and pole,
while setting luminaire assembly in position. Tighten
screws
B
.
4) Trim mains supply cable
A
to the desired length and
connect leads to their respective terminals at the base
of pole (L = Phase, N = Neutral, = Earthing).
Summary of Contents for RFL530-SE LED
Page 5: ...4 L N Supply cable...
