Installation Procedure
It is recommended to incorporate either the supplied
anchor bolts or the optional WE-EF planted root
ESV10 to facilitate a rigid installation.
1) Switch off the mains electrical supply.
2)
For Planted Root Installation:
Adjust the planted root
A
and fix it on the
ground (the post can get adjusted in 90° steps).
In the case of [S] & [R] lenses, the focus is on
the alignment. An arrow in the luminaire shows
how the direction of light should be orientated.
3) Loosen the screws
C
and remove the screw
cover
B
. Twist the locking screw
G
and open the
door
H
of the post and take it off.
4) Insert the connecting cable through the post
D
and the door opening. Adjust post with the cast
base
E
and fix it with the provided mounting
hardware. Put on the screw cover
B
and firmly
tighten the screws
C
.
5) Cut connecting cable to the required length.
Connect the mains supply leads to their respec-
tive connecting cable leads. (N = neutral, L1 =
phase, = earthing). Check that rating shown
on the luminaire label conforms with the mains
electrical supply.
6) Reposition door
H
and tighten the locking
screw
G
.
O
D
C
B
E
A
G
H
