2
Light Source
LED
Maintenance
Apart from cleaning the product’s exterior surfaces, no special maintenance work is required.
Do not use high-pressure cleaners.
To remove the head of the luminaire during maintenance, loosen screw J with Torx T-20 tool and rotate it
anti-clockwise until it can be lifted up.
If the head of the luminaire is returned after maintenance, align it to the bollard post as shown below and
secure by tightening screw J.
In case of component failure due to abnormal circumstances or at end of life, replacement must be carried
RXWE\DVXLWDEO\TXDOLĥHGDQGWUDLQHGSURIHVVLRQDO
Warning: Do not open luminaire while mains supply is switched on.
