WE-EF ETV13-CC/TW Series, User Manual

Page: 19 / 54

19
RDM ADDRESSING
IT IS POSSIBLE TO RE-ADDRESS THE LUMINAIRES AFTER SHIPMENT FROM THE FACTORY VIA AN RDM CONTROLLER OR RDM
ADDRESSING TOOL. ALL DEVICES ON THE DMX LINE MUST BE RDM CAPABLE TO ALLOW FOR ADDRESSING EN MASSE.
RDM ADDRESSING THROUGH PHAROS DMX CONTROLLER (PHAROS DESIGNER):
1. ENSURE THAT THE PROJECT IN DESIGNER HAS BEEN UPLOADED TO THE CONTROLLER.
2. OPEN THE PATCH MODE AND SELECT THE CONTROLLER THAT THE FIXTURES ARE CONNECTED TO.
3. SELECT THE DMX PORT THAT THE FIXTURES ARE CONNECTED TO.
4. PRESS THE DISCOVER ON PORT [X] BUTTON.
5. THIS WILL OPEN THE DISCOVERY DIALOG FROM WHERE YOU CAN INITIATE A DISCOVER. ONCE THE FIXTURES HAVE
BEEN DISCOVERED, SEE THEIR MODE AND ADDRESS/IDENTIFY THEM.
RDM ADDRESSING THROUGH NICOLAUDIE DMX CONTROLLER (NICOLAUDIE RDM MANAGER):
1. OPEN RDM MANAGER WITH USB CONNECTION TO DMX CONTROLLER.
2. RDM MANAGER WILL AUTOMATICALLY DISCOVER YOUR INTERFACE, SELECT IT ON SCREEN.
3. YOU WILL SEE A LIST OF CONNECTED FIXTURES, YOU CAN PRESS THE BULB ICON TO BEACON THE FIXTURES. SELECT
THE FIXTURE YOU WANT TO READDRESS.
4. CHANGE DMX ADDRESS AND PRESS SAVE.
RDM ADDRESSING THROUGH WE-EF WIRELESS TRANSCEIVER (LUMENRADIO SUPERNOVA):
1. OPEN SUPERNOVA WITH DIRECT ETHERNET CONNECTION TO TRANSMITTER.
2. PRESS DISCOVERY, ALL CONNECTED FIXTURES WILL POPULATE ON THE SOFTWARE.
3. DOUBLE CLICK ON ANY OF THE DRIVERS TO OPEN UP THE DETAILS FOR THAT FIXTURE. YOU CAN PRESS THE IDENTIFY
BUTTON TO BEACON THE SELECTED FIXTURE.
4. TYPE IN THE DESIRED START ADDRESS UNDER THE DMX TAB AND CLOSE WINDOW.
RDM ADDRESSING THROUGH RDM CONTROLLER (CITY THEATRICAL DMXcat®):
1. CONNECT DMXcat® TO DMX+/- IN LEADS USING A 5-PIN XLR ADAPTER. OPEN DMXcat® APP.
2. THE APP WILL AUTOMATICALLY SEARCH FOR ANY CONNECTED RDM COMPATIBLE FIXTURES
3. YOU CAN PRESS THE IDENTIFY BUTTON TO BEACON THE SELECTED FIXTURE.
4. SELECT THE RDM BUTTON ON THE DESIRED FIXTURE.
5. TYPE IN THE DESIRED DMX ADDRESS.