ø 3.62
ø 2.56
1.89
4.72
ø 2.56
1.97
D1
D2
H1
BET – 185-1855
B
TVE – 139-6900 / 139-6901 / 139-6902
ø 0.394 (max.)
ø 0.472 – 0.748
5.75
SJB130 – 185-1624
A
C1
ETC109
Marker Lights with Installation Blockout
IP68, IK09
Light Source
1 x 4 LEDs . . . . . . . . . . . . . . . . . . . . . . . 0,5 VA / 12V DC
unicolour red, green, blue, yellow or white
3 x 4 LEDs . . . . . . . . . . . . . . . . . . . . . . . 1,2 VA / 12V DC
tricolour red, green and blue
Class III, ta 35°C
Glass surface temperature approx. 3°C above
ambient temperature
Installation Accessories
Installation Blockout
lb
185-1855
D1 = 2.56 / D2 = 3.74 / H = 4.72
0.66
Sealable junction box
185-1624 SJB130
0.88
Electronic converter
A
B
C1
139-6900 TVE-DC
– 12V / 12W
9.14 6.38 5.51
139-6901 TVE-DC
– 12V / 25.5W 9.14 6.38 5.51
139-6902 TVE-DC – 12V / 60W 11.50 9.92 8.66
Installation
The luminaire should be installed and maintained by a
suitably qualified person in compliance with the latest
construction and electrical regulations and relevant
legislation.
During checking of the installation location the maxi-
mum temperature on the outer lens should be consi-
dered. The temperature is shown on the identification
label.
Suitable for Drive-over at low speeds and high
pressure tires, up to 5 tonnes.
The luminaire should not get covered partially or
completely. Dirt on the lens has to get removed.
Do not open the luminaire in humid conditions or
during rain. This will result in condensation forming
inside the luminaire.
Maintenance
Apart from cleaning the product’s exterior surfaces,
no special maintenance work is required. Do not use
high-pressure cleaners.
Protect our environment: Discard used LEDs in compli-
ance with the most recent environmental legislation.
Notice:
If the luminaire is modified by anybody other
than the original manufacturer, then the warranty will
no longer be valid and shall become the full respon-
sibility of the modifying person/organisation. Claims
based on defects attributable to improper installation
and/or application, and the consequences thereof, are
excluded.
In case of component failure due to abnormal circum-
stances or at end of life, replacement must be carried
out by a suitably qualified and trained professional.
In case of questions please contact our technical hot-
line at +1 724 742 0030 (Monday - Friday from 08:00
until 16:00 hours).
