3
Installation
The product must be installed and maintained by a
VXLWDEO\TXDOLĥHGSURIHVVLRQDOLQFRPSOLDQFH
with latest building/construction and/or electrical
regulations and relevant legislation.
Warning:
6ZLWFKRĪPDLQVHOHFWULFDOVXSSO\SULRUWR
installing and connecting the luminaire.
Notice:
,IWKHOXPLQDLUHLVPRGLĥHGE\DQ\ERG\RWKHU
than the original manufacturer, then the warranty
will no longer be valid and shall become the full
responsibility of the modifying person/organisation.
Claims based on defects attributable to improper in-
stallation and/or application, and the consequences
thereof, are excluded.
Installation Procedure
6ZLWFKRĪPDLQVHOHFWULFDOVXSSO\
2) Check that rating shown on luminaire label
conforms with mains electrical supply.
3) Loosen pressure screw R and packing ring G.
Place pressure screw R and packing ring G
around mains cable C.
3XVKDWOHDVWLQRIPDLQVFDEOH
C through
spigot P. Reposition packing ring G and tighten
pressure screw R to secure mains cable C.
5) Loosen locking screws S to allow insertion of
spigot P into spigot holder H. Keep support
screw T tightened.
6) Align and lock support screw T using spigot P
keyway.
7) Push luminaire up until spigot P is fully
recessed into spigot holder H. Rotate luminaire
counter-clockwise and allow it to rest on
locating support screw T.
8) Tighten locking screws S, to lock luminaire in
position.
9) Open luminaire by loosening screws L.
Carefully unhook lanyard I.
/RRVHQVFUHZV-GRQRWWXUQRXW5RWDWHJHDU
tray M counter-clockwise and pull out gently.
11) Connect mains cable C to terminal connecto
K.
12) Return gear tray M to its original position and
tighten screws J.
13) Reconnect lanyard I and close luminaire by
tightening screws L.
