Granudos 45/100-CPR Touch XL + Touch + S5
Dosing unit
Index: 02
Date modified: 06/06/2019
OI No.: BA SW 003-02 Granudos 45-100 CPR Touch+Touch+S5-Dosiereinheit EN.docx Page 12 of 58
3.2.2
Upright column with a rotatable drum holder (standard)
The rotatable drum holder is mounted on the stable upright column (3). The chlorine drum
(7) is set on this drum holder and strapped to the rear wall with 2 tension bands (8). Together
with the drum holder, the drum can be rotated into the dosing position. The spring bolt (14)
is used to lock the drum holder in its respective position. The dosing pump (15) for the dosing
of the pH reducer (acid) and the dirt filter (31) for the booster pump of the dissolving unit
are installed on the upright column.
From GR45/100-CPR
1.
Main switch
2.
Pressure retention valve
3.
Upright column with drum holder
4.
Ball valve Inlet
5.
Control unit
a)
For
type CPR Touch XL with measuring cell
block
, see separate operating instructions
“
CPR-Touch XL Measuring and control unit”
no.
BA MR 001)
b)
For
type CPR Touch XL without measuring
cell block
, see separate operating instructions
“
GRANUDOS Touch Control unit”
no. BA SW
010)
c)
For
type S5 without measuring cell block
,
see separate operating instructions “
GRANU-
DOS Touch Control unit”
no. BA SW 014
)
6.
Nameplate (on the right side of the upright pipe,
covered)
7.
Chlorine drum
8.
Tension bands
9.
Safety belt
10.
Chlorine dosing unit
11.
Clamping lever for the safety
belt
12.
Dust protection
13.
Dissolving and flushing unit for
chlorine granulate with cover
14.
Spring bolt for the turning
device (on the right side of the
upright pipe, covered)
15.
Dosing pump for pH reducer
(acid) (on the right side of the
upright pipe, covered)
16.
Suction lance for pH reducer
17.
Canister for pH reducer (acid)
with protective tub
18.
Dust extraction (not
illustrated
),
see
Figure 11, Page 18
Figure 5, GRANUDOS 45/100
1
2
3
4
17
16
14
15
9
10
11
8
5
13
6
12
7
