6
English
4. Getting started
At first, you have to connect your device via the USB port on the charger. For
some devices, a separate connection cable (e.g. microUSB cable) is required for
this. Then plug the charger into a properly installed socket.
Important note:
Please remove the charger after charging process from the
socket in order to avoid constant recharging of all connected devices.
5. Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the de-
vice to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
for purposes other than those described in the instructions. This product is not a
toy. Keep it out of the reach of children or mentally impaired persons. Any repair
or alteration to the device not carried out by the original supplier, will invalidate
the warranty or guarantee. The product may only be used by persons who have
read and understood these instructions. The device specifications may change
without any separate prior notice to this effect.
