background image

2

 

 

 

 

 

Power failure or unstable voltage.

Abnormal sound or smell from the device.
AC power cord is damaged.

TV set is damaged due to falling off, knock or impact.

Any liquid or foreign matters gets onto the TV set.

Under Following Conditions

Turn off the TV set immediately, 
unplug the power cord from the 
power outlet, and contact 
authorized maintenance 
personnel.

If coal gas or other flammable gases leak, do not unplug the power cord of the TV set or other electric

appliances; instead, close the valve of the gas immediately and open the doors and windows.

Warning

Do not disassemble the TV set by yourself, it may cause electric shock or fire. Contact 
qualified personnel for maintenance.

Do not turn on the TV set in thunderstorm weather; instead, unplug the power plug and antenna 
connector to avoid lightning strike.

Do not touch the plug with wet hands, it may cause electric shock.

Safety Warning and Notice

 

100-

AC  

This TV must be connected to a three pin socket outlet for safety.

All cables can be connected or pulled out only after power supply is turned off.

Do not attempt to fix the TV set in an unstable position, it may fall, become damaged, or

even catch fire.

Do not place TV set in the following environments:

1. With direct sunshine, moisture, excessive heat, excessive cold or heavy dust;
2. With flammable or explosive substances;
3. With flammable or corrosive gases;
4. In bathroom, kitchen, etc.

Do not use damaged or improper power socket, and ensure the plug and socket are

connected properly.

Keep the power plug and socket free of dust and metal materials.

Do not damage the power cord:

1. It is prohibited to refit the power cord;
2. Do not place heavy objects on the power cord;
3. Keep the power cord away from heat source;
4. Do not  drag the power cord when unplugging.

Do not connect too many appliances to one power strip, or else it may cause fire due to high

power consumption.

Do not let open flame (e.g. lit candle) near the TV set, or it may cause electric shock

or fire.

Do not place water or other liquids on the TV set as electric shock or fire could occur.

To avoid short circuit, electric shock and damaging the product, do not penetrate any sharp

objects, metal or liquid into the signal connector or air vents.

The vents on the case are designed to release heat so the inside components of the unit do

not reach high temperatures and can operate for long periods of time. Do not cover any of the
holes.

Only use 

240V

60/50Hz power supply. 

Summary of Contents for 0E-55LED

























Reviews: