wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
5
(SIDE VIEW)
Step 6:
• With the help of another person, place the rack on it’s back on a protected flat surface.
• Attach the
reinforcement bracket
to the
side panel
by using a 1/4”-20x20mm joint connector bolt going through pre-drilled hole in the bracket and the
side panel
and making sure bolt is pushed as far as it can go. While holding the joint connector bolt flush to the side panel, take a 1/4”-20 joint connector
nut and attach it to the end of the bolt turing it clockwise until it’s completely on. Use a 4mm Allen wrench or 4mm hex bit and a screw gun to tighten as
needed. Repeat for the second bolt and nut.
• Repeat with the remaining (3)
reinforcement brackets.
Step 7:
• Attach the
3” wheel caster
by threading the stem of the locking caster into the
reinforcement bracket
making sure it’s threaded all the way.
• Repeat for the remaining locking casters.
•
NOTE:
Casters are
NOT
to be used as a leveling device.
• With the help of another person, place the rack in its’ upright position.
Assembly Instructions
Viola/Violin Rack
Reinforcement
bracket (shown
in red)
CUSTOMER REF. NO.
0400993
SHEET 1 OF 1
EMB
DWG. NO.
TITLE:
REV
SQUARE FOOT
Phone: 715-669-5360; Fax: 715-669-5929
ANGULAR:
3" wheel, 4" load height, 3" swivel rad.,
written permission of WISCONSIN BENCH
CUST. No.
CUSTOMER NAME:
FILE LOCATION:
REF. NO.
xx-xx-xx
thereon to others without the expressed
NONE
SCALE:
reserves the right to change specifications,
disclose this drawing or any information
copy, distribute, reproduce, transmit or
and proprietary. WISCONSIN BENCH
in WISCONSIN BENCH. Holder may not
rights, title, and interest therein reside entirely
BENCH and are to be treated as confidential
unless the drawing is marked certified. All
1°
DRAWN BY
REVISION DESCRIPTION
BY
DATE
DRAWN DATE
1.25" tread width, w/brake
PT
This drawing and the information contained
herein are the property of WISCONSIN
TOLERANCES:
2 PLC. DEC. .06
3 PLC. DEC. .031
507 E. Grant St., Thorp, WI 54771
3” wheel
caster
Step 7
NOTE:
Colored images are for illustrative purposes only.
Step 6
Red dots show the location
where the joint connector
bolts are to be used in this
step.