wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
4
iXchange® Wall
Assembly Instructions
SSW0802-AL
Step 4:
• Locate the second wall cabinet (
iXW1155-1
). Place it on the right side of the base top. Align the holes of the
wall cabinet with the holes of the first wall cabinet that has already been secured while also aligning the pre-
drilled holes in the bottom of the wall cabinet with threaded inserts in the base top (
iXBTop_94
).
• Bolt wall cabinet (
iXW1155-1
) to the base top (
iXBTop_94
) using ¼”-20x30mm joint connector bolts.
Step 5:
• With pre-drilled holes in wall cabinets aligned together, place the 1/4”-20x30mm joint connector bolt w/ Loctite
through pre-drilled hole on the inside of one of the cabinets making sure bolt is pushed as far as it can go. While
holding the joint connector bolt flush to the cabinet, take a 1/4”-20x17mm joint connector nut and attach it to
the end of the bolt (through the other base cabinet) turing it clockwise until it’s completely on. Use a 4mm Allen
wrench or 4mm hex bit and a screw gun to tighten as needed.
• Repeat this for the (3) remaining attachment points.
iXW1155-1
iXBTop_94 (base top)
JCB
JCN
iXW1155-1
JCB
iXB3145-1
