WayteQ xTAB-50 GPS, User Manual

Page: 6 / 41

3
To avoid data loss or damage, please stop using files/ programs in the storage card
before remove the T-Flash card, and then tap
Settings > Storage > Unmount SD card
to remove it safely.
[Note]:
1. Make sure the location and direction of the storage card is correct when
inserting, otherwise it is easy to cause damage/destroy to the storage card.
2. To avoid incompatibility or unrecognized of the storage card, major
brands of storage card are recommended.
2.4 Hot plug of storage card
Please do not hot plug the storage card when using or browsing its files.
For example, when you are running the Music/Video Player/ Gallery, the storage card
may damage if you push out the storage card directly and the running program will
stop automatically to protect the device. As for details of inserting/removing storage
card, see
2.3 Use the storage card .
2.5 Memory space
The device contains 2 memory spaces: local storage & extended storage card. Local
storage appears as “Local” and extended storage card as “SD1”in the device. The
capacity of built-in flash varies from 4GB, 8GB and 16GB because of different model
of the xTAB-50 GPS series. The built-in flash capacity of your device depends on the
model your purchased xTAB-50 GPS series support extended storage card of capacity
maximum 32GB.
2.6 Power on/off
1.
Power on: press down the Power Button to turn on the device when the battery is
full enough
2. Power off: press down the Power Button for about 3 seconds and then a menu
with options will popup, select Power Off to turn off the device
3. Stanby: press down the Power Button for about 3 seconds and then a menu with
options will popup, select Stanby and then the device goes to stanby mode. To
turn on from standby mode press Power Button.
4. Screen Lock
：
press down the Power Button to shutdown the screen to save battery
life. Press down the Power Button again to activate the locked Home Screen. After
unlocking, the device will resume the screen before locking the screen.