6
pull out the adaptor while charging. When it is fully-charged, the LED will turn to Blue. If low
battery or no battery, please charge it immediately.
3.1.3 Use the car charger to supply power
1.
Connect the DC part of the adaptor with the power interface
；
2. The other part connect to the power socket, it supplies power while charging
.
【
Note
】
Please insert the car adaptor after running the car so as not to damage the
machine by electricity collision.
3.2 Power on/off
Power on/off is controlled.
3.2.1 Startup:
Please check
：
The battery is enough, or it is connected to external power source;
Please press the button on the top of the unit to boot.
【
Note
】
If bring the unit from one place to another place, please boot until it adapts to
the environment. Big humidity fluctuation will make the mainframe short circuited.
3.2.2 Shutdown
Press the button on the top of the unit to turn off, the unit will enter the power
saving mode and maintain the last operation status when boot next time.
3.3 Reset system
If the system cannot work, you can reset the system by the following way:
Click the reset key on the right part of the machine to reset the system by using the
Summary of Contents for x985BT
Page 46: ...46 Picture 4 57...
