©Copyright 2020 Wayne Dalton, a division of Overhead Door Corporation
9
500367.0001 NEW 10/08/2020
STEP 2
STEP 2
INSTALL HEAD ASSEMBLY (Continued...)
SECTION 5 - INSTALLATION
• Lift the fascia plate using a fork lift or other appropriate lifting equipment and lower it, attaching it to the back of the jamb, as shown in FIG 8.
• Be sure the bottom of the fascia plate is approximately 4-1/2” below the top of the guides, leveled and centered; Fasten it with wall fasteners. See FIG 9 and FIG 10.
• Install the wall fasteners provided into the head plate flanges to attach it to the jamb. See FIG 10.
FIG 10
FIG 8
FIG 9
