background image

Speed Button

You can press to the " SPEED " button to select either High or Low fan 
speed.

High fan speed will result in quicker moisture removal.

Set the speed high for maximum moisture removal. When the humidity has 
been reduced and quiet operation is more preferred, you can set the fan 
speed back to Low.

Overflow Protection

When the water tank is full of water, the machine will turn off automatically. 
The indicator light "

     

" will flash. After you empty the water from the water 

tank, the indicator light "

    

 " will turn off. The machine will restart to work.

Auto Defrost

When the dehumidifier is running at a lower temperature, the system will 
automatically determine whether there is a presence of frost. If any frost 
exists, it will defrost automatically.

Defrost Action

The fan runs at high wind speed when the compressor stops, and the screen 
displays the defrosting symbol. When defrosting, it is in high wind speed 
mode, but after defrosting, it will return to previous setting wind speed.

Action Description

Power on:
Compressor starts after the fan has worked for a few seconds (tens of 
seconds when the first power-on).

Power off:
Compressor shuts down at once, and the fan will stop after a few seconds. 
(When other malfunction occurs, or the humidity reaches desired level, the 
fan will stop after tens of seconds).

The compressor features a " 3 minutes delay protection function " , when the 
dehumidifier is powered, the compressor can only start after 3 minutes after 
its last shutdown.

Summary of Contents for YDA-858E























Reviews: