TROUBLES SHOOTING
PROBLEM
PROBLEM CAUSE
CORRECTIVE ACTION
Light does not come
on at night when
motion is detected
No power is being delivered to
the light.
Another light source is causing
the security light to think it is
daylight
Wiring inside electrical box came
loose.
Check that ciruit breaker and /or
wall switch power is on.
Turn off surrounding lights and /or
re-aim the sensor head.
After turning power off to the light,
reconnect any loose wiring.
Sensor is in a shaded area and is
fooled into thinking it is nighttime.
Shine a flashlight onto the light
sensor.
Relocate security light to where
allows enough light enter the sensor
during daytime.
There is lighting, arc welding,
mobile sources or other such
unstable light
Avoid to irradiate by such light
source
Security light comes
on during the day
The Light flashes
1.
2.
3.
1.
2.
3.
1.
2.
CARE AND MAINTENANCE
Any cleaning or maintenance of the light should be carried out with the source of power turned off. The light should be
cleaned with a damp cloth. Never use any abrasive cleaning products on the lamp heads or motion sensor lens.
Never add paint to the light. Do not clean with a high pressure spray or hose pipe. Peridically, check the silicone is still
in place and the light is secure on the wall mount.
5
USING THE MOTION LIGHT
The motion light has many time and detection distance
settings. Please take the time to read through the
options below to decide how best to utilize the light for
home security purposes.
1)
TIME: allows the choice of timed activation.
TEST: this selection allows the light to be activated with
motion for up to five seconds regardless of ambient light.
1MIN: the light activates for one minute at night
5MIN: the light activates for five minutes at night
10MIN: the light activates for ten minutes at night
2)
SENS (sensitivity): allows you to decide on the distance
of detection.
H- is high sensitivity. This sets the maximum distance.
The light will detect motion up to 49 feet.
M- is medium sensitivity. The light will detect motion up to 36 feet.
L - is the lowest distance. The light will detect motion up to 26 feet.
NOTE: At an ambient temperature of
77 degrees fahrenheit
, the
detection distance is at max..As the temperature increases or decreases, the detection distance will be affected.
3)
AUTO: this operates the light as a motion detector at night. When motion is detected the light will activate at full
power. If this is selected the TIME and SENS selections become important.
3H: at dusk the light will turn on at low brightness as an accent light. When motion is detected the light illminates
at full brightness. The mode will operate like this for 3 hours. After 3 hours the light becomes just a motion light and
the accent light feature turns off.
6H: at dusk the light will turn on at low brightness as an accent light. When motion is detected the light illuminates
at full brightness. The mode will operate like this for 6 hours. After 6 hours the light becomes just a motion light and
the accent light feature turns off.
DUSK TO DAWN: at dusk the light will turn on at low brightness as an accent light. When motion is detected the light
illuminates at full brightness. The mode will operate like this until dawn or as ambient light increases.
