Waygate Technologies Krautkramer USM 100, Operating Manual, Page: 150 / 330

5 Operation Gates
150 Rev. 9 (09/2023) Krautkrämer USM 100
Gate A Logic
This function can also be set for gate B, C and IF.
You can set the criteria for triggering a gate alarm.
Note
For the configuration of the alarm output, see
function
Alarm Output (see page 143).
Positive
The alarm is triggered if the gate is exceeded.
Negative
The alarm is triggered if the gate is not reached.
Off
The gate is turned off, alarms and measurement func-
tions are disabled, and the gate is not visible on the dis-
play screen.
Gate B Start
This function corresponds to Gate A Start (see
page 146).
Gate B Width
This function corresponds to Gate A Width (see
page 146).
Gate B Threshold
This function corresponds to Gate A Threshold (see
page 146).
Gate B TOF Mode
This function corresponds to Gate A TOF Mode (see
page 147).
Gate B Logic
This function corresponds to Gate A Logic (see
page 150).